š§® Mounts above a 31.5" (1200mm) wide or narrower belt (See drawing for details)
š§® Up to 10" (400mm) working gap
MODEL AND CLASSIFICATION:
* Model: OCP 3380E Overband Magnet
* Type: High-Intensity Permanent Magnet System
* Design: Deep field, non-deteriorating compact permanent magnet design
PERFORMANCE AND CAPACITY:
* Maximum Primary Conveyor Belt Width: 800 mm
* Typical Working Gap: 250 mm (10")
* Magnetic Flux Density: 8,200 Gauss 2/cm @ 250 mm
* Field Performance: High-intensity system comparable to rare earth magnets at working gap
MOTOR AND DRIVE:
* Motor Power: 1.1 kW
* Electrical Supply: 400/460V / 3 Phase / 50/60 Hz
* Belt Speed: 1.5 mtrs/sec @ 60Hz (Approx. 5 ft/s)
* Drive Features: Integrated electrical isolator included
DIMENSIONS AND WEIGHT:
* Overall Length: 1666 mm (65.6")
* Overall Width: 1113 mm
* Overall Height: 509 mm
* Magnetic Field Width: 825 mm (32.5")
* Suspension Centers (Length): 850 mm
* Suspension Centers (Width): 801 mm
* Total Mass Load: Approx. 369.5 kg maximum per suspension eyebolt
CONSTRUCTION AND MATERIALS:
* Framework: Stainless Steel construction
* Belt Width: 700 mm
* Mounting Hardware: Integral lifting eyes/eyebolts for suspension
* Guards: Standard safety guards included
INSTALLATION NOTES:
* Safety: Open magnetic field; formal risk assessment required upon installation
* Interference: All equipment within 1000 mm of the magnet underside must be non-magnetic
* Discharge Requirements: Customer-supplied discharge chute must be non-magnetic and fit under belt edge
* Placement: Position overband between conveyor idlers if possible
We use cookies to improve your experience. Privacy Policy.