Used Secondary Crumb Rubber Processing Line

Processing 6 Mesh to 30 Mesh @ 1,800 lbs/hr.
*System does NOT have primary shredding equipment. Primary shredding equipment available for additional cost.
1. Feed Hopper, 8'x6'8", with 10"x14' incline trough screw conveyor mounted on casters. 5hp 184T motor.
2. Rotary drum magnet mounted under hopper conveyor. .5hp 56C motor.
3. Forsberg natural frequency conveyor, model 24"x12"x14FT SN 16134, with 3 bottom outlets and 2 end outlets (5 products) with screens. 2hp 145T motor.
4. Auger Systems 6"x15' incline screw conveyor with stand for bagging screened buffings from #3 to super sack stand #28 or poly bag station #30. 2hp 145T motor.
5. 10"x18' screw conveyor with stand for +4 material from NFC. 2 drop outs for 50lb bagger and/or super sack. 2hp 145T motor.
6. 10"x10' trough screw conveyor for material from NFC. 2hp 145T motor.
7. 10"x14' screw conveyor for material from #5 to surge hopper #7. 2hp 145T motor.
8. 9"x16' incline screw conveyor with 4'x4' surge hopper to feed cracker mill. 2hp 145T motor.
9. Rotary drum magnet under #7 mounted above cracker mill. .5hp 56C motor.
10. ARMI cracker mill, SN 1023, 30"w x 19" and 24" diameter corrugated rolls 75%, TECO 200hp 449T2 frame, Western Gear, model OFD 320 reduction gearbox, autolube lubrication system.
11. Zarsky model ACWC-90-0 SN M060200-2 8 ton chiller for cracker mill. Water circulation system with 2hp 56J motor.
12. 12"x21' incline screw conveyor for cracker mill discharge to screen. With cold water jacket. 7.5hp 213T motor.
13. 12"x 24' incline screw conveyor for return material from screen to cracker mill. 7.5hp 213T motor.
14. Rotex model 842 2 deck screen on stand. 59"x96" and 59"x83" screens. 14 screens. 3hp 182T motor.
15. Technetics model CR5 talc feeder with stand.
16. 18" vacuum cyclone for pneumatic conveying material from screen to bagging station. With 8" ducting. 7.5hp 213T motor.
17. 6"x20' incline screw conveyor for material from cyclone to bagging station. Also serves as airlock for cyclone. 3hp 182T motor.
18. Weigh in place bagger for super sacks. Includes surge hopper above, pneumatic gate, pneumatic vibrator, Fairbanks controller.
19. Flex-Kleen bag house, model 30/36-PVBL-25 (11G), for cyclone exhaust.
20. Gracida fixed magnet with 2- 12"x12" magnet frames.
21. 24" vacuum cyclone with rotary airlock for dust control system. Includes 6" and 8" ducting 12" screw conveyors and screen. 7.5hp 213T motor. .5hp gear motor for airlock.
22. 10"x18' incline screw conveyor with stand to feed gravity separator from feed hopper #1 to cracker mill, when running whole tire crumb. 2hp 145T motor.
23. Forsberg gravity separator, model 90-V SN 16125, for fiber removal. 2hp 145T motor. Rotary airlock with 1hp 56C motor.
24. Forsberg destoner to remove rocks and non ferrous metal. 5hp 186T motor
25. Forsberg model 18"-8"-5'4" SN 16127 natural frequency conveyor for material from #22 and #23 to #6 when running whole tire crumb. 1hp 56H motor.
26. Forsberg model 18HA R1 SN 16112 24" vacuum system for #22. Belt drive blower and 24" duct work. Marathon 30hp 286T
27. 46" Cyclone on stand for #25 with rotary airlock for fiber from #22
28. Auger Systems 6"x15' screw conveyor for material from #26. 2hp 145T motor.
29. Super sack bag stand. Shop built.
30. Super sack bag stand. Shop built.
31. Taylor model OM-2A bagging station for poly bags
32. Taylor model OM-2A bagging station for poly bags
33. 16"x26' incline belt conveyor
34. 32"x 60" crossbelt magnet mounted on #32. .75hp 56C motor.
35. Rotex, model 804DA AAMM, 4 deck screen. Cable suspended mounted on stand. 39"x96", 39"x87", 39x78", 39x69" screens. 17 total.
36. 24" cyclone mounted on stand with rotary airlock. Cyclone only no blower. No motor for airlock.
37. Feed hopper with horizontal trough conveyor.
38. Air compressor.