Galbreath Model 645XHD-7-PC 6-Yard Surplus Stationary Compactor

CHARGiNG BOX CAPACITY
1. MANUFACTURERS RATING: 6 cu.yd
2. WASTEC RATING: 4.12 cy.yd
3. HOPPER WIDTH: 60 in.
4. HOPPER LENGTH: 97.5 in
5. RAM HEIGHT: 30.5 in
6. RAM PENETRATION: 15 in
7. COMPACTOR WEIGHT WITH P.U 12,200 lbs

RAM DETAILS
1. 1/2 inch thick tam face plate with 314 inch thick stiffener plates
2. Ram base Ia 3/8 inch AR plate wIth 3 Inch channels at 24 inch spacing
3. Ram top Is 1/4 inch plate with 3 inch channels at 12 inch spacing
4. Ram sides are 1/4 inch formed plate

PACKER FABRICATION DETAILS:
1. 1/2 in thick AR floor plate wIth 4 in channels at 12 in spacing
2. 3/8 in thick side plates with 4 x 3 tube vertical stiffeners and 3 x 2 tube horizontal stiffeners
3. Top rail is 5 x 3 x 1/4 in tube; Bottom rail Is 4 x 4 x 3/8 angle-gusseted
4. Breaker bar Is 8 x 8 x 1 angle
5. 2- 8 inch channels (22.8#) with diagonal tube bracing provide rear stability
6. 11 ga, top deck sheet Is standard
7. Additional side stiffener tubes
8. Additional gussets in discharge area
9. Blade Assy 1/2 in pit and 4 in x 8 in x 1/2 in tube
10. Blade Cyl: (2) 3 in x 42 in

ELECTRICAL - HYDRAULIC
1. Motor: 20hp, 1800 rpm, 208/230/460, 3 phase, 60 hz ODP housing
2. Pump: 20 gpm Regen Gear
3. Cylinder: 7 bore 4.5 rod 120 stroke
4. PSI" 2100 (2300 max), 80,800 ram force (88,500 max)
5. Cycle time: 62 sec, 239 cu.yd/hr
6. Tank: 56 gal
7. PU location: Remote
8. Control Circuit: 110V
9. Ram Cycle Control: Limit Switch
10. SemL.automalic compactor cycle only
Turn key swltch
Ram extends, retracts,
and stops automatically