Assemble & Run Untha Shredder

A. Replace The Following Parts:
1-GG003400-Gearbox Housing RS50-Z(C-29264-1/99)
2-GG003900-Side Wall Spacer RS50-480mm VL
2-GG004000-Side Wall Spacer RS50-270mm(not hardened) 519 E
1-ZR003300-Gear, Pinion Z15,m3 (input Shaft
1-ZR003500-Shaft, Pinion & Gear- 15 tooth m5.5 straight tooth gear
1-DT004800-Cone, Bearing Sleeve M174/D80-168/L
1-DT004700-Cone, Bearing Sleeve M174/D80-168/R
1-DT004400-Cone, Bearing Sleeve M144-L(largehulse)
1-DT004300-Cone, Bearing Sleeve M144-R
2-LA001600-Bearing, Ball-Bearing 22219
2-LA000600-Bearing, Roller Ball 22214E
2-LA001400-Bearing, Roller NJ 2209E Type 2
2-LA001500-Bearing, Roller NU2212
2-LA000700-Bearing, Roller NJ2212 ECP
2-LA001700-Bearing, Roller Ball 22218E
4-LA001300-Bearing, Roller Tapered 23022 CC
4-LA001100-Bearing, Roller Ball 22216EC
B. Repair or replace belt pulleys.
C. Clean machine of chips and debris.
D. Re-stack knives and general re-assembly.
E. Test run with power direct to motors and video unit running.
No electrical work will be performed.
Safety guards, devices and training to be supplied by buyer.
All work and parts are provided on an "as-is, no warranty" basis as described in detail on the reverse side of this quotation and our invoice.