Model HV10 Used Excel Horizontal Baler

Per Manufacture's Literature.
Platen Force, Overall: 235,619 lbs. / 255,254 lbs. Maximum
Platen Face PSI: 145 PSI / 157 PSI Maximum
Bale Weights:
OCC 1,500 lbs. (680 kg) 4.1 TPH
Magazines 2,400 lbs. (1,087 kg) 10 TPH
Newspaper 1,700 lbs. (771 kg) 8.4 TPH
Office paper 1,700 lbs. (771 kg) 8.4 TPH
HDPE 1,250 lbs. (566 kg) 3.4 TPH
PET 950 lbs. (431 kg) 2.6 TPH (May vary with percent of capped bottles)
Aluminum cans 900 lbs. (408 kg) 3.95 TPH
Tin cans 1,800 lbs. (816 kg) 5.1 TPH
Aluminum extrusions 1,200 lbs. (554 kg) 2.7 TPH
Painted aluminum siding 2,000 lbs. (907 kg) 4.5 TPH
Radiators 1,700 lbs. (771 kg) 4.7 TPH
Insulated copper wire 3,500 lbs. (1,587 kg) 10.5 TPH
Misc. non-ferrous scrap 1,500 lbs. (680 kg) 5.1 TPH

Patented Hydraulic Baler Pusher Bar -- Extends to push bale beyond vertical door to allow tie off and ejection of the next bale.
50HP Motor, Standard Voltage - 460 Volt, 60 Hertz, 3 Phase (230v available).
Industrial Hardened Logic Controller.
Hardox® 400 Replaceable Wear Liners.
300 Gallon Hydraulic Reservoir with Regenerative Circuit.

Tongue and Groove Corrugated Floor.
NEMA 12 rated Enclosures and Controls on Moveable Pedestal.
Castle Key Safety Interlocking System.
Full Bale Chamber Penetration.
Standard Hopper with Inspection Window.
Clean Out Tool, Grease Gun, and Extra Spray Paint.
One Bundle of 12 gauge x 13 ft. Single Loop Wire Ties.
Paint – Excel Blue.
Air to Oil Heat Exchanger.
Lower Photo Eye.
Cycle Time: 17 seconds (13 Second Short Stroke).
Cylinder Size: 10" Dia x 100" Stroke.

Overall Dimensions: Approx. per manufactures literature.
84" x 254" x 88"